The Yocto-Thermistor-C is an USB interface for NTC and PTC thermistors. It can measure up to six temperature points. Each of the six channels can be configured independently thanks to tables or reference temperatures and β coefficients. The Yocto-Thermistor-C is an isolated device: there is an electric isolation between the sensor part and the USB part.
The Yocto-Thermistor-C is shipped with six tiny NTC thermistors connected to a 10 centimeter wire. You can extend them with any regular electric wire.
All six channels share one contact allowing the use of a bigger terminal and bigger wire (26-16 AWG). If you wish to connect the thermistors in a independent manner, choose the Yocto-MaxiThermistor.
The Yocto-Thermistor-C can also be used as a multichannel ohm-meter.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.
 |
 |
 |
USB cables and enclosures to be ordered separately.
Specifications
Product ID:THRMSTR1Product name:Yocto-Thermistor-C
USB connector:micro-B
Width:58mm
Length:50mm
Weight:17g
Channels:6
Refresh rate:1Hz
Measuring range:100Ω...500KΩ
Accuracy (Ω) between 1KΩ...10KΩ:~0.1%
Accuracy, typical (Ω):1%
Protection class, according to IEC 61140:class III
USB isolation, dielectric strength (1 min.):31.5
Normal operating temperature:5...40Ѓ
Extended operating temperature1:-30...85Ѓ
Supported Operating Systems:Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers:Driverless, no driver needed
API / SDK / Libraries:C++ Obj-C C# VB.NET UWP Delphi Python Java Android LabVIEW
API / SDK / Libraries (TCP only):Javascript Node.js PHP
RoHS compliance:RoHS III (2011/65/UE+2015/863)
Suggested enclosure:YoctoBox-MaxiIO-Transp
Harmonized tariff code:9032.9000
Made in:Switzerland
1 The extended temperature range is defined based on components specifications and has been tested during a limited duration (1h). When using the device in harsh environments for a long period of time, we strongly advise to run extensive tests before going to production.
Accessories and related products
