The Yocto-Maxi-IO-V2 device provides 8 digital I/O, electrically isolated from the USB bus. Each I/O bit can be configured individually as a simple input, an open-drain input (internal pull-up), a TTL/CMOS-like output, or an open-drain output (open collector).
Without external power source, each I/O pin can receive or produce a digital signal at 3V or 5V levels (low current).
With an external power source, the device can work with voltages up to 28V and deliver up to 250mA per channel, which makes it possible to drive small relays for instance.
If you need 4 channels only, you can use the Yocto-IO instead.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.
 |
 |
 |
USB cables and enclosures to be ordered separately.
Specifications
Product ID:MAXIIO02Product name:Yocto-Maxi-IO-V2
USB connector:micro-B
Width:58mm
Length:57mm
Weight:18g
Channels:8
Chipset:NCV7608
Refresh rate:250Hz
Output impedance:<10Ω
Max working voltage:28V
Protection class, according to IEC 61140:class III
USB isolation, dielectric strength (1 min.):1kV
Normal operating temperature:5...40Ѓ
Extended operating temperature1:-30...85Ѓ
Supported Operating Systems:Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers:Driverless, no driver needed
API / SDK / Libraries:C++ Obj-C C# VB.NET UWP Delphi Python Java Android LabVIEW
API / SDK / Libraries (TCP only):Javascript Node.js PHP
RoHS compliance:RoHS III (2011/65/UE+2015/863)
Suggested enclosure:YoctoBox-MaxiIO-Transp
Harmonized tariff code:9032.9000
Cables and enclosures:available separately
Made in:Switzerland
1 The extended temperature range is defined based on components specifications and has been tested during a limited duration (1h). When using the device in harsh environments for a long period of time, we strongly advise to run extensive tests before going to production.
Accessories and related products
