Feature
EM100Pro-G3 is an SPI NOR Flash emulator that seamlessly integrates with high-speed DRAM memory, ensuring optimal code updating performance. Developed in collaboration with leading SPI NOR Flash suppliers, this tool is designed to emulate the behavior of both current and next-generation SPI NOR Flash devices.
This emulator significantly improves productivity by swiftly downloading firmware code or data, even for high-density applications of up to 1Gbit. Additionally, it offers a valuable "SPI BUS Analyzer" feature that captures and logs all SPI commands and data on the SPI bus, facilitating the debugging process.
Highlights
- Emulate all the market SPI NOR Flash in one click
- Excellent code Update and download performances
- Designed to support future SPI NOR Flash evolution:
- Voltage: 1.8V/3.3V
- Frequency: Up to 50MHz for Single IO, Dual IO, and Quad IO
- Capacity: 512Kbit~4Gbit
- Support Dual and Quad IO communication
- Display and edit memory content evolution
- Debug functions:
- SPI Protocol analyzer and SPI HyperTerminal
- High-speed internal buffer for SPI Trace log data saving
- Suitable with Intel motherboard
- EM100Pro-G3 can connect with the Intel motherboard by a specific adaptor (optional)
Performance (Erase+Program+Verify)
IC Density | Programmer | EM100Pro-G2 | EM100Pro-G3 | ||
8Mb | 9s | 3s | 3s | ||
16Mb | 13s | 3s | 3s | ||
32Mb | 16s | 3s | 3s | ||
64Mb | 38s | 3s | 3s | ||
128Mb | 75s | 3s | 3s | ||
256Mb | 115s | 5s | 3s | ||
512Mb | 200s | 10s | 5s | ||
1Gb | N/A | 20s | 10s | ||
2Gb | N/A | 40s | 20s |
|
Hardware
The EM100Pro-G3 has two 2.54mm pitch male connectors of:
- 2x2 for the Reset and Trig signals
- 2x10 for the Emulation signals
EM100Pro-G3 is designed with an ISP header, through different cables/adaptors, it can connect to the PCB board directly. Please refer to Table 1 for the EM100Pro-G3 2x10 header pin out.
DediProg also provides the EM100Pro-G3 ISP Cable which is used to connect the EM100Pro-G3 programmer to the 2X5 2.54mm ISP Pin Header on board, please refer to Table 2 for the EM100Pro-G3 ISP Cable 2x5 pin out.
Table 1: EM100Pro-G3 ISP Header Pin Out (2x10),(2x2)
1 | NC | CS2 | 2 | ||
3 | CS1 | Vcc | 4 | ||
5 | MISO/DQ1 | Hold/DQ3 | 6 | ||
7 | Wp/DQ2 | CLK | 8 | ||
9 | GND | MOSI/DQ0 | 10 | ||
11 | 3.3V | NC | 12 | ||
13 | CTRL | NC | 14 | ||
15 | CTRL | 3.3V | 16 | ||
17 | CTRL | CTRL | 18 | ||
19 | GND | CTRL | 20 |
1 | GND | Reset | 2 | ||
3 | GND | Trig | 4 |
Table 2: ISP Cable Connector Pin Out (2x5)
1 | NC | CS2 | 2 | ||
3 | CS1 | Vcc | 4 | ||
5 | MISO/DQ1 | Hold/DQ3 | 6 | ||
7 | Wp/DQ2 | CLK | 8 | ||
9 | GND | MOSI/DQ0 | 10 |
Standard Package
- EM100Pro-G3 x 1
- USB 2.0 100cm Cable (A Male -C Male) x 1
- Power Adapter (Including US and EU plugs) x 1
- 2.54mm 2x10 to 2.54mm 2x5 cable x 1
- 1.27mm 2x4 to 1.27mm 2x4 cable x 1
- 1.27mm 2x4 to 1.27mm 2x4 cable 2.5cm x 1
- 1.27mm 2x8 to 1.27mm 2x8 cable x 1
- 2.54mm 2x10 to 1.27mm 2x4 SO8 connection adaptor x 1
- 2.54mm 2x10 to 1.27mm 2x8 SO8 connection adaptor x 1
- 12cm EM100Pro split cable with grabber clip x 1
- 1.27mm 2x8 SMT male header (10.3mm) x 4
- 1.27mm 2x4 SMT male header (6.0mm) x 4
- 1.27mm 2x4 SMT male header (10.3mm) x 4
- 15cm single wire with 2.54mm Dupont head x 5
- EM100Pro Reference Flash Adaptor (SO8W) x 1
- EM100Pro Reference Flash Adaptor (SO16W) x 1
- Grabber Clip x 2
SPI Flash Emulation Interface | SPI Bus Trace Interface | SPI Hyper Terminal Interface |