| case1d6blku | Enclosure 3 LAN + SFP + USB black |
|---|---|
| Status | active |
| Part numbers 3 LAN + SFP (apu6*) | case1d6blku = 3 LAN, 1 SFP, 2 SMA, USB, black anodized or painted case1d6u = 3 LAN, 1 SFP, 2 SMA, USB, silver anodized |
| Use with | alix2 / alix6 series (2 LAN / 3 LAN), apu1 / apu2 / apu3 / apu4 series boards (2 to 4 LAN) brk1d (wall mount bracket) pigsma (SMA reverse pigtail) pigsmaf (SMA female pigtail) mmcsma (MMCX SMA reverse pigtail) |
| Spec | Enclosure designed for ALIX.2* boards. Cutouts for 3 LEDs and 1 switch in front, cutouts for DB9, 2 to 4 LAN, 3 or 2 SMA connectors, DC jack in back. Enclosure made of anodized or painted aluminum. Dimensions 168 mm wide x 157 mm deep x 30 mm high. RoHS compliant. |
| Changes from case1c* |
|
| Includes | 4 screws to mount system board, 4 screws to close enclosure, 4 self-adhesive feet, 2 or 3 rubber plugs to close unused SMA holes. |
| Assembly notes | Tools needed: Phillips screw driver, 5 mm or 3/16" nut driver. Remove hex nuts from DB9 connector of ALIX board. Mount ALIX board in enclosure, then fasten all screws and hex nuts. CF card can be secured with Kapton tape to the CF socket, or a strip of elastic rubber (e.g. sealing strip for windows) on the inside of the top cover. For apu boards, also see instructions on heat spreader installation. |
| Customization | Customer silk screen, custom paint colors etc. are possible for volume orders. |
| Manufacturer | PC Engines |
| Origin | China |
